www.casview.com CP7012-1A CCTV Power Adapter Casview Manufacturer

CP7012-1A CCTV Power Adapter Casview Manufacturer

Home > Products > Power Supply >

Product name : CP7012-1A CCTV Power Adapter Casview Manufacturer

Product Parameter :

Product Description：

www.casview.com Features:

1. 77W Output Power Adapter
2. Output voltage & current: DC70V 1.1A
3. Input voltage range: 110~264VAC
4. Built in EMI filter with tiny ripple
5. 100% full load burn-in test
6. Air Cooling
7. Protection: Short circuit/ Overload/ Over voltage/ Over temperature

Specification:

Model CP7012-1A

Output DC output Voltage 70V±10%

Output Current Range 0-1.1A

Wave and Noise 120mVp-p

DC output Power 77W

Efficiency 85%

DC Voltage Adjustable Scope （at full load）≦0.5%

Input Voltage Range 85~264VAC      47-63Hz

Input Current 0.14A/115V, 0.07A/230V

Leakage Current <1mA/ 240VAC

Inrush Current Cold start 20A/120VAC, 40A/230VAC

Protection Over-load 105%~135%, Protection type: Constant current limiting,
recovers automatically after fault condition is removed

Over-voltage 105%---150% Rated Voltage, Protection type: Shut off

High-temperature RTH3>=65°C FAN ON<=55°C FAN OFF>=80°C Cut off output(5~15V)

Environment Working temperature and humidity -10°C~+50°C,   20~90%RH

Store temperature and humidity -20°C~+85°C,   10~95%RH

Temperature coefficient ±0.03%°C(0~50°C)

Vibration 10~500Hz,2G 10min./1cycle,Period for 60min,EACH AXES

Safety Withstand voltage I/P-O/P: 1.5KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC

Isolation resistance I/P-O/P,I/P-FG,O/P-FG: 100M Ohms/500VDC

Standard CE EMC Standard EN55015:2013+A1:2015, EN61547:2009, EN61000-3-2:2014, EN61000-3-33:2013

CE LVD Standard EN61347-2-13:2014+A1:2017, EB61347-1:2015

ROHS Standard IEC 62321: 2013, EPA3050B:1996, EN1122:2001, EPA3052:1996, EPA3060A, etc.

Other Dimension 70*39*31mm (L*W*H)

Weight 0.058kg

1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25℃ of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. I/P-O/P: Input and output interval, I/P-FG: Input and enclosure, O/P-FG: Output and enclosure

QQ